If the screen on your Apple Watch device does not work, it does not turn on and does not respond to button presses, you can deal with the problem yourself. To do this, you need instructions and appropriate tools. You don't need any special skills to understand why the screen isn't working.
The most popular reasons why the Apple Watch may fail include:
Often, the screen may not work because the Apple Watch device is dead. Then just put the watch on charge. If this does not help, then follow the following instructions:
If your Apple Watch screen won't turn on and you can't figure out why, the problem is serious. To determine the malfunction, special equipment and special tools will be useful - you will have to take the watch to a repair service center.
Specialists will help:
Sometimes, after running out of power, the smartwatch freezes or turns off. To restart your Apple Watch, you must simultaneously press the Side key and the Digital Crown. Perhaps after this the Apple Watch screen will start working.
Like any technology, Apple Watch breaks, breaks and fails. All this, of course, comes down to money, but over time, service centers have managed to reduce the cost of repairing watches, so now Apple Watch is cheaper than buying a new one (especially if you are unlucky enough to break it). Today, together with the ModMac service center, we will look at some of the most common problems with Apple smartwatches.
Perhaps the most common problem with Apple watches is the fragile, protruding display. Of course, there are craftsmen who treat their devices so carefully that even over time there is not a single damage on them, and the watch looks like new, but there are not many such lucky ones. Usually, users quite often touch the buckles on their bags, doors, corners or even walls with their watches. And this inevitably leads to damage to the device.
In addition, the watch sometimes falls when the user puts it on his hand and tries to fasten it. The danger of falling, as opposed to hitting a buckle, is that in this case not only can the display break, but the battery can also be damaged, and replacing it will cost . There is also a possibility of damage to the cable that is responsible for: however, it is replaced, and only original components are used - there are simply no others.
Apple, as you know, has given users the choice of glass being resistant to either scratches (sapphire crystal) or shatter resistance (oleophobic coating). You can protect your watch with various shockproof cases and glass, but then the tactile sensations will be lost, and it looks peculiar.
If the glass is still damaged, replace it. It is done quite quickly, but after replacement you should wait for some time for the adhesive layer between the glass and the body to harden.
Also one of the common breakdowns is a swollen battery. If this happens, in about a year the battery will fail, the watch will discharge much faster, and the worst thing about swelling is that the display may be pushed out. If you try to seal it, the battery may explode, so if you notice “peeling” of the display, you must urgently contact the service for diagnostics and repair.
As for button loops, vibration, antennas and other small elements, they practically do not fail and rarely need repairs. But you should always be careful when coming into contact with water, whether it's the very first Apple Watch or the new generation of watches - they are still susceptible to moisture. This applies less to the Apple Watch Series 2, however, with frequent contact with water for a long time, moisture can still get into the watch, and this, in turn, again brings users to service centers.
Well, don’t forget that for all readers of the site there is a 10% discount on repairs of Apple equipment at the ModMac service center!
The Apple Watch does not turn on, has stopped responding to presses, does not display the Apple logo while charging, or freezes at inopportune times, and even with enviable regularity? Technical failures are rare, but sometimes inevitable. Sometimes difficulties that arise are solved manually - by searching for the correct answer, sometimes - only Apple service center specialists can help solve the problem. And, if the warranty has long expired, and you don’t want to pay unknown craftsmen, then it’s time to sort through the proposed options from the list:
The developers immediately warn that using unofficial (not out of the box) accessories is strictly not recommended. Therefore, if it is worth checking the effectiveness of the available charging, then only the one that was included in the kit. If you don’t have a suitable “tool” at hand, then you should ask your friends for help or look into one of the Apple stores (or retailers) and check if the watch is charging.
If the USB cable is original and used straight out of the box, but still does not charge the watch, then you should remove the protective film on both sides of the charger and try to repeat the procedure again.
From a trivial point - check the socket, be sure to make sure that the cable is really inserted completely. It seems like a small thing, but it often affects the result.
You won’t have to dip the strap into a cleaning solution or polish the display for the tenth time until it shines, but you should deal with the back surface right away. Any soft cloth that will not scratch the surface of the case and will help remove dust and dirt is suitable for cleaning.
It is worth checking the effectiveness of this method several times - perhaps the problem is that the watch does not fit tightly to the charger. If desired, the cloth can be moistened with water (but without detergent and as carefully as possible - excess moisture will definitely not help solve the problem).
If you have the third version of the Apple Watch in your hands, you should use the Digital Crown button and be sure to clean it of any water that has entered the case.
Specialists from the service center describe the following technical problems that are beyond the capabilities of users:
For additional consulting assistance and answers to your questions, please contact us. On the official website, you are allowed to deal with ready-made advice or communicate in a text chat with employees, having formulated the question in advance (specialists in the domestic division understand Russian perfectly well).
If your Apple Watch won't turn on and refuses to respond to button presses, try to figure out the cause of the problem yourself. With the instructions and necessary tools, you can quickly fix simple problems. You can find out why the device does not turn on, check the integrity of the control board and the reliability of the contacts even without special skills.
Most often, the Apple Watch device fails for the following reasons:
A common reason why an Apple Watch device won't turn on is a low or damaged battery. In this case, the battery needs to be recharged or replaced. Hold the button on the side of the device and the Digital Crown to restart the watch until the Apple icon starts to light up.
If your Apple Watch suddenly stops turning on, the problem may be due to a settings issue. Pay close attention to alerts that appear on your Apple device screen. In them, developers describe problems and give options for eliminating them. If your Apple Watch is running low, connect it to the charger and wait for the company logo to appear.
If your Apple Watch stops turning on or responding to charging, you can fix the situation in the following ways:
You can also check if the charging is working properly. If the Watch icon is lit, Apple should be charging automatically. To restart your Apple device and make sure your installed apps are working properly, press the button on the side of your watch and press the Digital Crown.
A common reason why the Apple Watch does not turn on is that the power saving mode is running. In this case, tapping the screen will not start the clock.
What you need to know before you start restoring your device
To turn on your Apple Watch, press the power button located on the right side of the device. At the same time, you will notice that the “apple” is lit. The download time is determined by your Apple device model and is usually about a minute.
The iWatch device belongs to the category of mini-computers, the installed applications on which must be updated periodically. Apple Watch users note that after updating the software, the devices begin to work faster. If you want to put your Apple Watch into battery-saving mode, hold down the button on the right side of the device until the Eco Mode slider appears.
The Apple Watch is unable to function after being discharged. The watch display on which notifications appear consumes a significant amount of energy. Often the reason why notifications do not appear on the device is that the clock is locked or the Do Not Disturb mode is activated. You can solve the problem in the following ways:
If you want to check if the charger is working properly, try restarting the watch. To do this, hold the Side button and Digital Crown for 10 seconds. If the charge icon is not visible, leave the Apple device connected to the charging device for several hours.
Simple ways to repair smartwatches that turn off spontaneously:
If your Apple Watch stops turning on and you can't immediately diagnose the problem, the problem could be serious. The malfunction may be due to a failure of the button responsible for turning on the device, a malfunction of the microcircuit, or other reasons.
To determine the cause of the malfunction, you will need special equipment and tools. With their help you can perform the following repair operations:
Apple Watch users often have such problems - after discharge, the watch freezes or turns off. To force a restart, press the side button and the Digital Crown at the same time. If after rebooting the watch turns on, but you do not see that the “apple” is lit, or a notification with a red exclamation mark appears, this means that the device cannot be used due to a broken microcircuit or other parts.
If your Apple Watch device does not turn on and you need professional help, contact the YouDo service providers. Specialists will quickly and inexpensively find out the reason why the device does not turn on, the clock is frozen or the power button has stopped functioning.
Cooperation with Yudu performers provides the following advantages:
Leave a request on this page, describing your problem (for example, “Watch logo is on, Apple is not charging”). Experienced performers will help you inexpensively any day of the week if your Apple Watch device does not turn on at all.
Falls asleep when you are not actively using them. There are several convenient functions that allow you to wake up or activate the screen.
Wake on touch, wake on raising your wrist, opening the last used app are just a few of them. Below we will tell you how to set up the Apple Watch screen to wake up.
1) Open the application Watch on your iPhone or go to Settings on the Apple Watch itself.
2) Select Basic.
3) Go to the section Wake screen.
When you go to the Wake Up Screen section, you will see several items. They will be the same both on the watch itself and in the application on the iPhone.
This is the easiest and most convenient way to activate the Apple Watch screen. It will automatically wake up when you raise your wrist. Make sure you have the screen orientation set correctly depending on which hand you are wearing the watch on.
Go to Basic > Clock position. After this you can enable the option Assets. When raising your wrist.
This feature is perfect for those who often listen to music or podcasts. In order not to take out your smartphone every time, you can enable auto-launch of applications with audio on your smart watch.
Just click on the switch next to the option Audio software with autorun.
Here you can configure the display of the last used application.
Let's say you were working with the calendar, but got a little distracted. You can make it open automatically when you activate the screen.