Windows has a built-in disk imaging tool by default, but many users prefer to use third-party programs. The thing is that the built-in functionality is sometimes not enough to perform certain tasks.
In this article we will look at the main features of one of the programs for working with disk images - ImgBurn.
This program was created exclusively for working with disk images, so it does not have any additional functionality. Thanks to this, the software is simple and easy to use.
ImgBurn works with almost all known file formats, so there should be no problems with recording. Additional conversion is also not required. Using the program, you can burn any image to any disk of the appropriate size.
Let's look at how to use this program to burn images to disk:
When the entire procedure is completed, you will be redirected to the main ImgBurn window, and the disc can be removed.
This function may be required if you need to rewrite information from a disk to a computer. You can save all the data from the disk on your computer as an ISO image, and then unpack it using special programs.
Let's look at how you can burn an image from a disk to a computer using ImgBurn:
Now you have a full-fledged disk image on your computer, which can be used for various purposes, for example, rewriting to another disk or copying files from it to the computer.
Using the ImgBurn program, you can burn not only an ISO image to a disc, but also individual files from your computer. The step-by-step instructions for this case are as follows:
If you do not have the desire/opportunity to burn the contents of the folders to disk, then you can create an ISO image from them and burn it later.
The instructions for this item are as follows:
Sometimes it becomes necessary to delete all information stored on the disk. You can use standard formatting, but it is safer and more practical to use special programs for working with disks. ImgBurn has all the functionality necessary for this, but does not have a special section, so inexperienced users may have difficulties.
Step-by-step instructions for cleaning a disk using ImgBurn are as follows:
Also, the functionality of the program allows you to find out detailed information about the disk using the tool "Quality Test". Similarly, you can check the recording quality on the disc.
ImgBurn has the following list of advantages:
Unfortunately, the product is not without its drawbacks, which are as follows:
ImgBurn is a decent product that allows you to do basic work with disks. The program copes with its tasks perfectly and has more advantages than disadvantages.
ImgBurn is a small (in terms of space) but multifunctional application for burning CD/DVD/HD DVD/Blu-ray discs. The program can create images from disks, burn disks from images, burn disks from files, create images from files, check disks for readability.
How to burn a disk image using ImgBurn
1. Launch the program.
2. Switch the program to mode Posts. You can do this in two ways
A. Using the quick selection mode (program start window). Select item "Burn image to disk"
b. Or in the main menu select “Mode” - “Record”.
3. Insert a blank CD/DVD/BD depending on the size of the image being burned.
4. Select the image file by clicking the button to burn "Select file..."
If you created a disk image with ImgBurn, you should be looking for a file with the extension *. CUE/*. M.D.S. If you did not create an image using this program, but, say, downloaded it, then most likely it will be a file with the extension *. ISO. The program supports all major disk images.
5. By default, the program will record at maximum speed, but it is recommended to set the recording speed somewhere between 50%-75% of the declared maximum speed. For example, I have a DVD-RW disc with a maximum recording speed of 4x, I set the recording speed to 2x or 2.4x, this is necessary in order to reduce the likelihood of errors when recording
6. Press the big button "Record" .
7. Wait for the recording to finish.
The ImgBurn program is a small but multi-functional program for working with recording and copying CD/DVD/BD. Using it, you can manage almost any information stored on disk, and how to present this information on disk.
It has a lot of settings, once you understand them, you will no longer need to install heavy and paid programs like Nero.
To correctly record DVD-Video using the program, I recommend reading the topic on rutracker.org
Later, I hope, I will supplement this note with an overview of the program settings. I will be glad to receive comments, additions, and perhaps personal experience in using the program.
ImgBurn is an extremely simple, but reliable and time-tested program for burning CDs, DVDs and Blu-Ray discs. ImgBurn is a completely free utility that can be downloaded and immediately used for free for both personal and commercial purposes.
What the program can do:
OS
The ImgBurn program works in all versions of Windows from 95 to ten. Accordingly, it passed the full functionality test perfectly in XP, Vista, 7, 8, 10.
You can download the Russian version of the ImgBurn program using the following links:
Installing ImgBurn takes minimal time. After downloading, open the archive with the program and run the file Setup_ImgBurn_2.5.8.0.exe. Unfortunately, the entire installation process takes place in English, since Russification occurs in a fully installed program.
The images below will show the entire process step by step. They are clickable, click on the images to enlarge them:
ImgBurn is fully installed! A shortcut in the form of a yellow disk and fire appeared on the computer desktop:
But don’t rush to launch it, you still need to make the menu Russian.
Make sure ImgBurn is not running before performing the next step. If you still run it, you need to close the program window.
The downloaded program must include a localization tool. This is just one file called russian.lng. Go to the folder with the installed program, find the “Languages” folder in it and copy this file there:
Typically, the path to the folder is: C:\Program Files (x86)\ImgBurn\Languages , less often like this: C:\Program Files\ImgBurn\Languages , depending on the bit depth of the operating system.
After this, run ImgBurn and make sure that the Russian version of the interface is automatically configured. If this does not happen, then go to the “Tools” tab in the top menu, then “Settings” and select the Russian language yourself:
In addition to the program itself, you will also have the “ImgBurn Report” window running; you can close it and not use it. At any time, the report can then be opened using the key combination CTRL+Shift+L, or through the “View” menu.
As you can see, the ImgBurn interface itself is extremely simple:
The following functions are available:
Let's look at ImgBurn's capabilities point by point:
Most often this is required to create a complete copy of another disk, create bootable media, an installation disk, etc.
To write, first select the image file itself (see the image below), then the drive, which already has a blank disk, you can install a byte-by-byte check after recording and set the speed:
If there is nowhere to rush, then you can set the speed to lower in ImgBurn. If you need a lot of disks, then set the speed to maximum and select the number of copies lower - convenient for underground pirates :).
With byte-by-byte check (verification), the recording process will increase by 2-3 times. Test mode will simulate writing to the disk, but it will remain clean.
The procedure is approximately the same as with recording an image, but here you can “throw in” any number of files, folders, archives, images, etc., as long as it all fits on the disk.
It is not necessary to manually add or enter file paths into the ImgBurn source window. You can drag the mouse into the window. There you can change the order with the mouse.
You can find out the current total size for the entry by clicking on the calculator icon. On the "Device" tab, you can reduce the speed from the minimum and set the number of copies. The name of the entire disk is set in the “Labels” tab, the “Volume Label” field.
It comes in handy when you need to not only copy files from a laser disk to a computer, but also take a complete image using ImgBurn, for example, for later recording a full copy on another medium or for uploading it for download on the Internet:
Here you can do the following:
Also, for subsequent convenient transfer or recording to a medium of a set of different files, folders, including subfolders, ImgBurn has a mode for creating an image from files and folders. In this case, the image will be created on the computer’s hard drive or recorded on a flash drive; you can even upload it to a remote server for later downloading.
It was all simple, but it has become even easier! We simply drop into the large field on the left all the necessary files and folders that we want to pack into the image. In the “Destination” field, indicate its location and give a name. By clicking on the icon on the right, you can find out the size of the future image, or even easier - check the box next to “Auto”.
It’s easy when you need to compare what’s written to disk with the original image using ImgBurn. All the same “Data Verification”. In order not to resort to this tool, during recording, simply check the “Check” checkbox and then everything will be done automatically at the end of the recording task.
ImgBurn will check for damage to the laser media due to scratches, manufacturing defects, thermal effects, surface contamination, etc.
Sometimes it is worth checking disks with important data. For example, family photos and videos, important personal information, documents, work files, etc.
Our website is the official support site in Russian, where you can download the latest version 2.5.8.0 ImgBurn program with a localization for free.
There are a large number of both paid and free programs in the field of recording disk images. This niche is gradually fading, but is still in demand.
Let's consider several worthy analogues of ImgBurn from free software.
The Small CD Writer program is so simple and small that its weight is only about 300 kB and, unlike ImgBurn, it does not need to be installed on your computer: just download, run and use, it was originally created in Russian!
Unlike ImgBurn, the Small CD Writer utility cannot create images from disks, but it implements the three most popular functions for such software:
As you can see, Small CD-Writter has several disadvantages compared to ImgBurn. The main disadvantage is that it cannot create images and is not capable of performing byte-by-byte verification after recording, which is extremely important when creating bootable media or recovery disks.
Video on its use:
Official website of the developer: avt-lab.ru, you can download the Small CD Writer program from.
More powerful, heavier, with a powerful but intuitive interface.
It is a little more difficult to download and install than the previous two programs, but it may be worth it. Among the advantages of Ashampoo Burning Studio FREE over ImgBurn:
You can download it from the official Ashampoo website, but to run it you will have to get a personal key. To do this, you just need to provide your email address and the key will be sent to it. Or you can download it already with a key.
ImgBurn is the simplest tool for burning bootable media and then automatically checking the accuracy of the recording. Beginners may have questions about downloading, installation and Russification, but our instructions above with screenshots will help with this.
If you have any questions or suggestions, please add them using the form below. If necessary, our specialist will answer.